The Glow Staff is a beautiful addition to your glow collection. A single glow staff contains 2 LEDs (one at each end), has soft ball-ends (made of the same material as our glow poi), and consists of two ends and a center section. The break-down glow staves are easily disassembled for travel and storage.
Each end piece is 27.5 inches (70cm) long, and the center piece, in which both end pieces meet, is 23" long, A break-down Glow Staff weighs 1lb 3oz (~539gm).
Glow Staff Assembly Instructions:
- 1. Using a damp rag, wipe the tube ends that go into the center section; baby powder is used during assembly, and should be removed.
- 2. To facilitate a tighter hold on the ends by the center section, roll up the silicone sleeve once the ends are inserted. DO NOT remove the ends while the silicone sleeves are rolled up; unroll the sleeves before disassembling.
- 3. For a more secure connection, medical tape can be used to secure the ends to the center section
DO NOT leave the LED Glow Staff in the sun or in high-heat areas, as warping may occur.
Features [+] (Expand)
The LED Glow Staff come in a variety of colors and three strobe options:
|
Solid Colors
|
Blue, Green, Red, Blue/Green, Blue/Red, Green/Red
|
|
3-Color Fast Strobe (Red, Green, Blue)
|
 |
|
7-Color Change (Red, Green, Blue, Yellow, Turquoise, Purple, White)
|
|
|
All-Light
|
27 solid-color and strobing modes.
Download the Pattern Guide.
Download the Quick Start and Maintenance Guide.
|
The LED Glow Staff comes pre-loaded with batteries, but you should always plan ahead and get
additional batteries.
- 3 LR43 batteries: All colors
Note: Staff brightness is a function of the LED color and staff length. A shorter glow staff will be brighter. The photo to the left is somewhat brighter due to a slow shutter speed.