Fire Mecca - Staff Aluminum Tubing

Home

Staff Aluminum Tubing
E-mail this product to a friend

Our Aluminum tubing is drawn, hard anodized, and polished to a bright finish. High tensile strength and excellent resistance to corrosion are only a couple of its key properties. All of the Fire Mecca Fire Staff products are made from this Aluminum.

The two sizes we are carry are 0.75 inch (19.1 mm) OD and .875 inch (22.2 mm). The wall thickness makes them perfect for pairing on projects that must telescope, collapse, or break-down.

Sold in a continuous length, priced per foot. If you need multiple cuts, you must purchase cut labor here: Custom Cuts.
The 0.75 (3/4) inch has a maximum continuous length of 5 feet, and the 0.875 (7/8) inch has a maximum continuous of 6 feet. Any continuous length above 5 feet must be shipped by UPS.

Information for Bulk customers: Sold in multiples of 6 feet for 7/8 inch and 5 feet for 3/4 inch.

Product	SKU	Description	Ship Weight	Price	Order
3/4 inch (19 mm)	TUBALUM34	Ordered by the foot, lengths up to 5 feet, first cut free. Information for Bulk customers: Sold in multiples of 5 feet (5, 10, 15, etc.).	0.2100	Price: $1.99	Quantity:
7/8 inch (22.2 mm)	TUBALUM78	Ordered by the foot, lengths up to 6 feet, first cut free. You must choose UPS shipping for anything over 5 ft. Information for Bulk customers: Sold in multiples of 6 feet (6, 12, 18, etc.).	0.2000	Price: $2.99	Quantity:


Staff Groove Basics	Contact Fire Staff	BlazeLink Break-down Contact Fire Staff
Staff Grip


K1 Tape Wick, 1/8 In. (3.2 mm) Thick	K2 Tape Wick, 1/16 In. (1.6 mm) Thick	K2 Tape Wick, 1/8 In. (3.2 mm) Thick

Product Rating:

(5.00) # of Ratings: 1 (Only registered customers can rate)

(Only registered customers can rate)

1 - Terrible

2 - Bad

3 - OK

4 - Good

5 - Great

50%

100%

Sort: New to Old RE-SORT COMMENTS:

Showing comments 1-1 of 1

1. Eugene on 11/17/2009, said:

Has a much nicer cosmetic finish than comparable structural aluminum tubing, and a really convenient ID for stuffing with dowels. The only improvement I would like to see is better angular precision on the cuts. Mine were 5-10 degrees off of perpendicular, which isn't bad, but is noticeable.
Was this comment helpful? yes no (0 people found this comment helpful, 0 did not)

Showing comments 1-1 of 1